Sale!

Aqua-Quip EvoCR Series – LED Colour Niche Pool Light w/ Concrete Mounting Kit, 20M/30M Cable and Plug Kit

$95.10 $317.00

EvoCR LED Pool Lights for Existing Concrete PoolsThe EvoCR Series LED Light has been developed for renovators of concrete pools.The Housing is supplied with a 20mm socket for connection to 20mm rigid PVC conduit. The housing has a narrow diameter of just 6

Flash Sale Ongoing

00
Day
00
Hours
00
Mins
00
Secs
Event has ended
Quantity:
Select Pack Details:

EvoCR LED Pool Lights for Existing Concrete Pools

The EvoCR Series LED Light has been developed for renovators of concrete pools.
The Housing is supplied with a 20mm socket for connection to 20mm rigid PVC conduit. The housing has a narrow diameter of just 60mm and is inserted and sealed into a hole that is core-drilled through the pool wall.

Pool light mounts into the existing Aqua-Star housing.

The EvoCR LED Retro Fit Light is supplied with a factory-sealed light and a QuickConnect Plug Kit.

The plug kit connects to the existing cable and is then connected to the rear of the light by tightening the supplied lock nut.

Specifications

Operated by extremely safe extra low voltage supply (12V AC), low powerconsumption, long life-span, easy installation and operation.

Nominal Supply Voltage: 12V AC 50/60 Hz
Voltage Tolerance: +20%, -20%
Protection Rating: IPX8 (to 2.0m depth)
Temperature Range: 0C ~ +40C water temperature
Power Consumption: White, blue and green = 8 VA
Power Consumption: Spectrum III Multi Colour = 16 VA maximum
Light Output (typical): White-550 lumens, blue-180 lumens, green-500 Lumens
Fault Protection: Power-cycle run dry thermal cut-out. Voltage transient clamping.

Documentation

Brochure

Transformer Manual

Replacement Manual

LED Operating Manual

Controller Compatibility

Reviews

There are no reviews yet.

Be the first to review “Aqua-Quip EvoCR Series – LED Colour Niche Pool Light w/ Concrete Mounting Kit, 20M/30M Cable and Plug Kit”

Your email address will not be published. Required fields are marked *